Search results
Rohde & Schwarz Wideband Modulated Load Pull: The Test That Deliberately Breaks Your Amplifier
Load pull testing deliberately varies impedance away from the ideal operating point — until the amplifier's behavior is fully mapped. At the microwave show, R&S showed why wideband modulated load...
Rohde & Schwarz ZNA at 67 GHz: When 16 Traces Tell You Everything — Except What You Need to Know
Sixteen traces. Four Smith charts. Full S-parameter matrix from 10 MHz to 67 GHz. The R&S ZNA screen at the microwave show looked like everything you'd need. Here's what it...
Compliance Testing Up to 44 GHz — And a Robot to Run It
A yellow robot arm positioning antennas in a miniature semi-anechoic chamber. Two ESW EMI receivers running in parallel to 44 GHz. 510 MHz FFT bandwidth for gapless CISPR band coverage....
- FPC1500
- ISM band
- lab equipment
- NGE100B
- power supply
- RF demo
- RF education
- RF testing
- Rohde & Schwarz
- spectrum analyzer
Affordable RF Testing for Labs and Students: R&S FPC1500 + NGE103B Powering a Multi-Channel Demo
This hands-on RF test bench demo combines the compact R&S FPC1500 spectrum analyzer and NGE103B power supply to measure, power, and monitor a multi-channel RF module — all in one...
- Embedded World 2026
- High Speed PCB
- Insertion Loss
- PCB Design Validation
- S-Parameters
- Signal Integrity
- Transmission Line
- VNA
Signal Integrity Design Validation: Why PCB Structures Must Be Measured, Not Assumed
At GHz speeds, PCB traces are no longer passive wires — they define signal behavior. Here's how vector network analysis makes that visible, measurable, and fixable.
- 77GHz
- ADAS
- AutomatedTesting
- AutomotiveRadar
- AutomotiveTesting
- EMC
- RadarTargetSimulator
- RohdeSchwarz
- SignalIntegrity
Testing Automotive Radar in an EMC Storm: What Happens When 77 GHz Meets Interference
A speedometer showing radar-detected velocity — in real time, under active EMC interference. The R&S automotive radar testing demo at Cologne closed the gap between functional radar validation and EMC...
EMV 2026: The Shift from EMI Receivers to Measurement Architectures
EMV 2026 in Cologne once again confirmed its position as one of the most important events in the electromagnetic compatibility (EMC) field. Beyond product launches and live demonstrations, this year...
Differential Mode vs Common Mode: Why Splitting EMI at the Source Changes Everything
Differential mode and common mode EMI require different filters, different measurements, and different debug strategies. The R&S RTO G + ZES Zimmer LMG671 joint booth at Cologne showed what it...
High-Frequency Test Setup: R&S ZNL6 VNA + FSV3000 Spectrum Analyzer in Action
A look at Rohde & Schwarz’s high-frequency test demo featuring the ZNL6 vector network analyzer and the FSV3000 signal and spectrum analyzer — a classic RF combo for S-parameter and...
Automotive Ethernet Is Entering the Most Critical Phase of Its Adoption — And Most Engineers Are Not Ready
At Embedded World 2026, I watched a live Automotive Ethernet eye diagram close in real time. Here's what that means for every team building ADAS and SDV systems — and...
LISN + EMI Receiver + a Light Bulb: The Conducted Emissions Test That Every Product Needs
Three things: a LISN, a light bulb, and an EMI receiver measuring from 9 kHz to 30 MHz. This is the conducted emissions test that every electrical product sold in...
- 1000BASE-T
- CISPR Standard
- Electronic Certification
- Embedded World
- EMC Measurement
- EMI Receiver
- EMI TestingPre-Compliance
- FCC Compliance
- Pre-Compliance
- Radiated Emission
- spectrum analysis
Why Products Fail EMI: A Pre-Compliance Testing Guide for Engineers
Pre-compliance EMI testing helps engineers detect emission issues early, reducing certification risks and costly redesigns in modern electronic systems.
- AutomatedTesting
- DoublePulseTest
- GateDriver
- Oscilloscope
- PCIM2025
- PowerElectronics
- RohdeSchwarz
- SiC
- Wolfspeed
Double Pulse Testing, Three Ways: From Manual Bench to Automated Production Cell at PCIM
The double pulse test is the same. The infrastructure around it has split into three distinct product categories: precision bench characterization (R&S MXO5), automated production testing (iPE cell), and development...
EMC & REGULATORY TESTING OF DUT WITH RADIO FUNCTIONALITY
An AVM FRITZ!Box WiFi router as the device under test. An instrument rack worth six figures keeping its radio link alive while the EMC measurement runs. The R&S TS8996 solves...
Measuring the Invisible: Isotropic EMF Measurement Up to 8 GHz and What WiFi 6E Changed
WiFi 6E opened the 6 GHz band. Most existing isotropic EMF measurement systems stopped just below it. The R&S TS-EMF with the new TSEMF-B2E antenna extends coverage to 8 GHz...
1000BASE-T Ethernet Compliance Testing: What IEEE 802.3 Actually Demands from Your Hardware
Live from Embedded World 2026: how IEEE 802.3 compliance testing works — PAM-5 mask testing, test fixture setup, and ScopeSuite automation explained.