Search results
Observations on the Future of Test & Measurement and Embedded Systems--Embedded World 2026
Embedded World 2026 revealed a major shift in the embedded industry: systems are rapidly evolving from traditional control electronics into intelligent edge computing platforms. From the rise of Edge AI...
Europe Is Weak in AI Narrative. But at Embedded World, I Saw Something Different.
"FPGA & SoC. Made in Germany." No AI slogans. No hype. Just modules. At Embedded World, the Trenz Electronic booth was easy to walk past. But it was showing exactly...
De-embedding in High-Speed Signal Integrity: Reconstructing the True Signal Beyond the Measurement Channel
At Embedded World 2026, Tektronix presented something that did not look like a traditional oscilloscope demo. There was no waveform on a large screen, no eye diagram being explained to...
10 Real Technology Trends in Test & Measurement
Embedded World 2026 once again demonstrated how quickly the embedded industry is evolving. Walking through the exhibition halls this year, one could clearly see that embedded systems are no longer...
- AI Hardware
- Embedded World 2026
- High-Speed Design
- Jitter
- PDN Noise
- Power Integrity
- Protocol Decode
- SI/PI Analysis
- Signal Integrity
- Tektronix
Why Your Signal Problem Is Actually a Power Problem: The Physics Behind SI/PI Coupling
Power noise does not stay in the power domain. It becomes timing uncertainty, which becomes bit errors. At Embedded World 2026, I watched Tektronix demonstrate why signal integrity and power...
- Battery Emulation
- Battery Testing
- Electric Vehicles
- Embedded World 2026
- IoT
- Power Analyzer
- Power Electronics
- R&S NGU501
- ZES ZIMMER
Battery Emulation vs Battery Testing: Why the Best Labs No Longer Use Real Batteries
At Embedded World 2026, one trend stood out clearly: engineers are replacing real batteries with programmable emulation systems. Here is why — and what the complete test setup actually looks...
- Automotive Debugging
- CAN FD
- CAN XL
- Embedded World
- Oscilloscope
- Pre-Compliance
- RF Signal Analysis
- Signal Integrity
- Testing Mixed Signal
One Oscilloscope. Four Domains. Why Modern Automotive Debugging Is a System Problem
At Embedded World 2026, one Tektronix demo captured why modern automotive debugging spans four domains: CAN bus, RF/wireless, EMI, and signal integrity — all from a single oscilloscope platform.
- Embedded World 2026
- High Speed PCB
- Insertion Loss
- PCB Design Validation
- S-Parameters
- Signal Integrity
- Transmission Line
- VNA
Signal Integrity Design Validation: Why PCB Structures Must Be Measured, Not Assumed
At GHz speeds, PCB traces are no longer passive wires — they define signal behavior. Here's how vector network analysis makes that visible, measurable, and fixable.
- 1000BASE-T
- CISPR Standard
- Electronic Certification
- Embedded World
- EMC Measurement
- EMI Receiver
- EMI TestingPre-Compliance
- FCC Compliance
- Pre-Compliance
- Radiated Emission
- spectrum analysis
Why Products Fail EMI: A Pre-Compliance Testing Guide for Engineers
Pre-compliance EMI testing helps engineers detect emission issues early, reducing certification risks and costly redesigns in modern electronic systems.
Why Measuring GaN Switching Is Harder Than Designing It
At high dv/dt and di/dt, measuring GaN switching behavior becomes more challenging than designing it. This article breaks down a complete probe-based measurement system observed at Embedded World 2026.
1000BASE-T Ethernet Compliance Testing: What IEEE 802.3 Actually Demands from Your Hardware
Live from Embedded World 2026: how IEEE 802.3 compliance testing works — PAM-5 mask testing, test fixture setup, and ScopeSuite automation explained.
High-Speed Interface Testing for DDR and USB: When Digital Signals Become Analog
At DDR5 speeds, one bit lasts 156 picoseconds. At this scale, there is no digital — only analog behavior. At Embedded World 2026, I watched what it takes to keep...
Automotive Ethernet Is Entering the Most Critical Phase of Its Adoption — And Most Engineers Are Not Ready
At Embedded World 2026, I watched a live Automotive Ethernet eye diagram close in real time. Here's what that means for every team building ADAS and SDV systems — and...
- 12bit
- EmbeddedWorld
- EMI
- HighResolution
- Oscilloscope
- PowerElectronics
- SignalIntegrity
- WaveformAnalysis
- Yokogawa
12-Bit Oscilloscopes: When More Resolution Reveals More — and Demands More
12-bit resolution gives you 16× more vertical detail than standard 8-bit. But it also amplifies everything your probe introduces. A breakdown of the Yokogawa DLM5058HD demo
- Embedded World 2026
- High Voltage Measurement
- Motor Drive Testing
- Oscilloscope
- Power Electronics
- Signal Integrity
Isolated Oscilloscopes: Why They Are Critical for Power Electronics Measurement
Modern power electronics systems challenge traditional oscilloscope design. Shared-ground measurements introduce errors and risks in high-voltage environments. Isolated architectures provide a fundamentally different approach to accurate measurement.
Why Modern Debugging Requires Both Protocol and Physical Layer Analysis？
Most debugging tools show only part of the story.Oscilloscopes reveal signals.Protocol analyzers decode data.But real problems often exist between the two.