Battery Emulation vs Battery Testing: Why the Best Labs No Longer Use Real Batteries
At Embedded World 2026, one trend stood out clearly: engineers are replacing real batteries with programmable emulation systems. Here is why — and what the complete test setup actually looks...
Weiterlesen
1000BASE-T Ethernet Compliance Testing: What IEEE 802.3 Actually Demands from Your Hardware
Live from Embedded World 2026: how IEEE 802.3 compliance testing works — PAM-5 mask testing, test fixture setup, and ScopeSuite automation explained.
Weiterlesen
Automotive Ethernet Is Entering the Most Critical Phase of Its Adoption — And Most Engineers Are Not Ready
At Embedded World 2026, I watched a live Automotive Ethernet eye diagram close in real time. Here's what that means for every team building ADAS and SDV systems — and...
Weiterlesen
High-Speed Interconnect Testing: Why Signal Integrity Is Critical for Modern AI and Data Systems
At high data rates, interconnects are no longer passive connections.PCB traces, connectors, and cables behave as complex analog systems.Signal integrity is becoming a critical factor in modern AI and high-speed...
Weiterlesen
Why Modern Debugging Requires Both Protocol and Physical Layer Analysis？
Most debugging tools show only part of the story.Oscilloscopes reveal signals.Protocol analyzers decode data.But real problems often exist between the two.
Weiterlesen
Kelvin Measurement Explained: Why 4-Wire Sensing Is Essential for Milliohm and Micro-Ohm Precision
Measuring milliohm resistance is not as simple as applying Ohm’s law. At this level, lead resistance and contact effects dominate the result. Kelvin (4-wire) measurement eliminates these errors and enables...
Weiterlesen
Isolated Oscilloscopes: Why They Are Critical for Power Electronics Measurement
Modern power electronics systems challenge traditional oscilloscope design. Shared-ground measurements introduce errors and risks in high-voltage environments. Isolated architectures provide a fundamentally different approach to accurate measurement.
Weiterlesen
EMV 2026: The Shift from EMI Receivers to Measurement Architectures
EMV 2026 in Cologne once again confirmed its position as one of the most important events in the electromagnetic compatibility (EMC) field. Beyond product launches and live demonstrations, this year...
Weiterlesen
10 Real Technology Trends in Test & Measurement
Embedded World 2026 once again demonstrated how quickly the embedded industry is evolving. Walking through the exhibition halls this year, one could clearly see that embedded systems are no longer...
Weiterlesen
Observations on the Future of Test & Measurement and Embedded Systems--Embedded World 2026
Embedded World 2026 revealed a major shift in the embedded industry: systems are rapidly evolving from traditional control electronics into intelligent edge computing platforms. From the rise of Edge AI...
Weiterlesen
Intelligentes Schalten in SiC: Wie der Gate-Treiber EG120 von Bosch Oszilloskop-Feedback zur Synchronisierung von Leistungsbauelementen nutzt
Diese praktische Demo von Bosch zeigt, wie adaptive Gate-Stromformung und Echtzeit-Oszilloskop-Feedback eine der größten Herausforderungen bei der parallelen SiC-MOSFET-Schaltung lösen können.
Weiterlesen
Hochfrequenz-Testaufbau: R&S ZNL6 VNA + FSV3000 Spektrumanalysator im Einsatz
Ein Blick auf die Hochfrequenz-Testdemo von Rohde & Schwarz mit dem Vektornetzwerkanalysator ZNL6 und dem Signal- und Spektrumanalysator FSV3000 – eine klassische HF-Kombination zur S-Parameter- und Emissionsvalidierung.
Weiterlesen