Suchergebnisse
- Embedded World 2026
- High Voltage Measurement
- Motor Drive Testing
- Oscilloscope
- Power Electronics
- Signal Integrity
Isolated Oscilloscopes: Why They Are Critical for Power Electronics Measurement
Modern power electronics systems challenge traditional oscilloscope design. Shared-ground measurements introduce errors and risks in high-voltage environments. Isolated architectures provide a fundamentally different approach to accurate measurement.
When an Oscilloscope Becomes a Motor Drive Analyzer: The Case for Application-Specific Measurement
The MDA 8208HD doesn't call itself an oscilloscope. It's a Motor Drive Analyzer — and that distinction defines everything: 8 channels for three-phase systems, automated harmonic analysis, and correlated time-frequency...
- DesignValidation
- GaN
- HighSideMeasurement
- Keysight
- Oscilloscope
- PCIM2025
- PowerElectronics
- SiC
- SignalIntegrity
Two Oscilloscopes, One Wolfspeed Board: How Keysight Tackles the High-Side Measurement Problem at PCIM
One Wolfspeed SiC evaluation board. Two Keysight oscilloscopes — 1 GHz 14-bit on the left, 6 GHz 16-bit on the right. Same DUT, different measurement questions, different instrument tiers. The...
EMC & REGULATORY TESTING OF DUT WITH RADIO FUNCTIONALITY
An AVM FRITZ!Box WiFi router as the device under test. An instrument rack worth six figures keeping its radio link alive while the EMC measurement runs. The R&S TS8996 solves...
- AutomatedTesting
- Bluetooth
- EMC
- Keysight
- RealTimeSA
- SignalIntegrity
- SpectrumAnalyzer
- WiFi
- WirelessCoexistence
Synchronized, Automated, Multi-Band: The Keysight Approach to EMC and Wireless Coexistence Testing
869 MHz and 2.4 GHz monitored simultaneously, time-synchronized, with 100% probability of intercept and automated test sequencing. The Keysight multi-instrument coexistence demo at Cologne explained what it takes to validate...
Bode Plot as a Design Tool: How Filter Characterization Predicts EMC Compliance
One curve, three frequency regions, one answer: does your EMI filter work — and where does it stop working? A breakdown of the Omicron Lab Bode 500 demo from a...
- Automotive Debugging
- CAN FD
- CAN XL
- Embedded World
- Oscilloscope
- Pre-Compliance
- RF Signal Analysis
- Signal Integrity
- Testing Mixed Signal
One Oscilloscope. Four Domains. Why Modern Automotive Debugging Is a System Problem
At Embedded World 2026, one Tektronix demo captured why modern automotive debugging spans four domains: CAN bus, RF/wireless, EMI, and signal integrity — all from a single oscilloscope platform.
- 77GHz
- ADAS
- AutomatedTesting
- AutomotiveRadar
- AutomotiveTesting
- EMC
- RadarTargetSimulator
- RohdeSchwarz
- SignalIntegrity
Testing Automotive Radar in an EMC Storm: What Happens When 77 GHz Meets Interference
A speedometer showing radar-detected velocity — in real time, under active EMC interference. The R&S automotive radar testing demo at Cologne closed the gap between functional radar validation and EMC...
What Are You Missing with an 8-Bit Oscilloscope? A Closer Look at the UNI-T MSO5000HD
More bits alone do not make a better oscilloscope. What matters is whether higher resolution, low noise, deep memory and fast acquisition help you see something your existing instrument may...
One Signal, Four Perspectives: What a 12-Bit Oscilloscope Actually Shows You
The same signal, four analytical perspectives at once. The Teledyne LeCroy WavePro 804HD-MS 12-bit demo in Turin showed what it means to move from waveform observation to behavioral characterization.
- DoublePulseTest
- GaN
- GateDriver
- HighSideMeasurement
- IsolatedOscilloscope
- PCIM2025
- PowerElectronics
- SiC
- SignalIntegrity
The World's Only Fibre Optic Isolated Oscilloscope: Why Cleverscope CS548 Exists and What It Solves
How do you measure the high-side gate voltage in a GaN inverter when the switching node swings at 100 V/ns? The Cleverscope CS548 uses fibre optic isolation — 2kV between...
- 12bit
- EmbeddedWorld
- EMI
- HighResolution
- Oscilloscope
- PowerElectronics
- SignalIntegrity
- WaveformAnalysis
- Yokogawa
12-Bit Oscilloscopes: When More Resolution Reveals More — and Demands More
12-bit resolution gives you 16× more vertical detail than standard 8-bit. But it also amplifies everything your probe introduces. A breakdown of the Yokogawa DLM5058HD demo
Measuring the Invisible: Isotropic EMF Measurement Up to 8 GHz and What WiFi 6E Changed
WiFi 6E opened the 6 GHz band. Most existing isotropic EMF measurement systems stopped just below it. The R&S TS-EMF with the new TSEMF-B2E antenna extends coverage to 8 GHz...
10 Real Technology Trends in Test & Measurement
Embedded World 2026 once again demonstrated how quickly the embedded industry is evolving. Walking through the exhibition halls this year, one could clearly see that embedded systems are no longer...
EMV 2026: The Shift from EMI Receivers to Measurement Architectures
EMV 2026 in Cologne once again confirmed its position as one of the most important events in the electromagnetic compatibility (EMC) field. Beyond product launches and live demonstrations, this year...
Observations on the Future of Test & Measurement and Embedded Systems--Embedded World 2026
Embedded World 2026 revealed a major shift in the embedded industry: systems are rapidly evolving from traditional control electronics into intelligent edge computing platforms. From the rise of Edge AI...